How to connect a MyQ Wi-Fi garage door opener to a home Wi-Fi network

Step-by-Step instructions on connecting your MyQ Wi-Fi Garage Door Opener to your home’s Wi-Fi network.

Before you can connect a MyQ Wi-Fi garage door opener to your home network, you will need:

• A smart phone or tablet
• 2.4 home Wi-Fi network
• A strong Wi-Fi signal in the garage
• Your Wi-Fi network and the password

---

Connect with Apple® iOS mobile device

1. Create a MyQ account, if you already have one, log into the MyQ app.
2. Tap Garage Door Opener with Wi-Fi ceiling installed on the Device Setup screen.
3. Review and then tap Next on the What You Need screen.
4. Choose the type of Wall Control that looks like yours and follow the instructions to activate Wi-Fi learn mode.
   

   	Tap Menu > Use the down arrow and select Program by tapping the side arrow > Use the down arrow and select Wi-Fi Setup by tapping the side arrow.
   	Lift the button cover and press and release the learn button.
   	Press and hold the learn button (side) for 6 seconds, the LED under the front button will begin to flash.

5. In the app tap Next.
6. Tap Yes, if you hear a beep.
7. Leave the MyQ app and go to your phone’s Wi-Fi settings.
8. Tap the network that begins with MyQ-XXX.
9. Return to the MyQ app and tap Next.
10. Select your home Wi-Fi network from the list.
11. Enter your network password and tap Next. Your garage door opener is now connecting.
12. Name your garage door opener and tap Next.
13. Tap Finish to see your new device in the app.
14. Tap the garage door to activate the opener.

Congratulations! You’ve successfully completed the setup.

---

Connect with Android mobile device

1. Create a MyQ account, if you already have one, log into the MyQ app.
2. Make sure when prompted in the app you enable Location settings
3. Tap Garage Door Opener with Wi-Fi ceiling installed on the Device Setup screen.
4. Tap Next on the What You Need screen.
5. Choose the type of Wall Control that looks like yours and follow the instructions to activate Wi-Fi learn mode.
   

   	Tap Menu > Use the down arrow and select Program by tapping the side arrow > Use the down arrow and select Wi-Fi Setup by tapping the side arrow.
   	Lift the button cover and press and release the learn button.
   	Press and hold the learn button (side) for 6 seconds, the LED under the front button will begin to flash.

6. Tap the network that begins with MyQ-XXX on the Discovered screen.
7. Select your home Wi-Fi network from the list.
8. Enter your network password and tap Next. Your garage door opener is now connecting.
9. Name your garage door opener and tap Next.
10. Tap Finish to see your new device in the app.
11. Tap the garage door to activate the opener.

Congratulations! You’ve successfully completed the setup.